MI 3250 MicroOhm 10A
Instrument Description
18
Instrument is overheated. Measurement process is disabled.
Battery supply voltage is low.
P1, P2, C1 or C2 terminal is not connected to the instrument or
too high resistance is detected.
Measurement current and result is within defined limits.
Measurement current is out of defined limits.
Measurement result is out of defined high limit.
Measurement result is out of defined low limit.
3.4.4 Battery and time indication
The indication indicates the charge condition of battery and charger connection.
Battery capacity indication.
Low battery.
Battery is too weak to guarantee correct result. Replace or
recharge the battery cells.
Recharging in progress (if mains supply cable is connected).
Time indication (hh:mm).
Note:
Date and time is attached to each stored result.
3.4.5 Backlight operation
After turning the instrument ON the LCD backlight is automatically turned ON. It can be
turned OFF and ON by simply clicking the
LIGHT (
☼
)
key.
Note:
If you press and hold the L
ight (☼) key for approximately 5 s the instrument will
RESET!
