A 1636
DC/AC Current clamp
4
1 Symbols and Warnings
To ensure a high level of operator's safety during using of A 1636 DC/AC current clamps the
following warnings has to be considered:
Do not apply around or remove from hazardous live conductors.
!
De-energize the installation on which the current is measured or adopt safe
operating procedures when working on hazardous live installations, during
application and removal of A 1636 current clamps.
!
Do not use the current clamp if any damage is noticed!
!
Consider all generally known precautions in order to avoid risk of electric shock
while dealing with electric installations!
!
Do not extend hands over safety barrier to prevent of electric shock! Only
handles are allowed to be touched during measurement!
!
Symbol on the current clamp indicates the possibility of a hazardous live
condition if the operator ignores the required safety measures.
!
If the current clamps are used in a manner not specified in this Instruction
manual, the provided protection can be impaired!
!
Only a competent, authorized person is allowed to carry out service intervention!
!
Do not connect clamp output elsewhere than to Metrel PQ Analyzers (MI 2892, MI
2885, MI 2883).
Current clamps are protected by double insulation.
