A 1378
PV Remote Unit
Saving of results
17
6 Saving of results and synchronization with the
instrument
The measured results and time of measurement are automatically stored into the PV
Remote unit’s memory.
After the measurement the stored results can be synchronized with results in the
instrument MI 3108 / MI 3109 that were measured at the same time. The instrument can
then calculate correct STC values.
Before the measurements the time and date between the instrument and Remote unit
should be synchronized. For more information about this feature refer to MI 3108 / MI
3109 Instruction Manual.
For time and results synchronization the RS232 port on the instrument MI 3108/9 must
be connected with the RS232 port on the remote unit. Use the PS/2 to RS232 (female)
data cable delivered with the MI 3108/9 and the RS232 (male) to PS/2 cable adapter
delivered with A 1378.
Figure 6-1: Interface connection for the RS232 (male) to PS/2 cable adapter
Connection for synchronization
Figure 6-2 Connection of the instruments during synchronization
