K
NOWLEDGE IS
P
OWER
E
nhance your installation and fabrication skills by
enrolling in the most recognized and respected
mobile electronics school in our industry.
Log onto www.installerinstitute.com or call
800-354-6782 for more information and take steps
toward a better tomorrow.
®
Metra recommends MECP
certified technicians
IMPORTANT
If you are having difficulties with the installation of this product,
please call our Tech Support line at 1-800-253-TECH. Before
doing so, look over the instructions a second time, and make
sure the installation was performed exactly as the instructions
are stated. Please have the vehicle apart and ready to perform
troubleshooting steps before calling.
The World’s Best Kits.
®
MetraOnline.com
© COPYRIGHT 2018 METRA ELECTRONICS CORPORATION
REV. 10/22/18 INST99-6514B
I N S TA L L AT I O N I N S T R U C T I O N S
99-6514B
UPDATING
Attention:
In order to update the Axxess interface, the interface must have power from the vehicle.
• Download and install the Axxess Updater from axxessinterfaces.com.
• Connect the USB-MINI-CAB update cable (sold separately) between the interface and the computer. The cable will connect into
the micro-B USB port inside the interface.
• Remove the main connector from the vehicle. This will remove power from the interface.
• Reconnect the main harness back to the vehicle, putting power back to the interface.
• From the Start Menu of the computer, click on “Axxess Updater”, and then click “Update Firmware”. The interface will begin to
update at this point.
Note 1:
If 30 seconds elapses before you finish this step, you will need to remove power from the interface, then reapply
power, and then start the update process again.
Note 2:
Please note which firmware downloaded to the interface. This will help in troubleshooting, if need be.