REV. 5/25/2018 INST99-3010S
3
(Figure G)
(Figure H)
(Figure I)
DASH DISASSEMBLY
KIT PREPARATION
(Figure A)
(Figure B)
7.
Remove (4) Phillips screws now
exposed, and then lift up on the rear
of the center console. Slide toward
the back of the vehicle then unclip
and remove the entire center console.
(Figure G)
8.
Remove (2) 9/32” screws securing the
climate control/radio trim panel and
remove. (Figure H)
9.
Remove (4) 9/32” screws securing the
radio chassis, and then remove.
(Figure I)
Continue to Kit Preparation
1.
Cut and remove the sub dash radio
support to make room for the interface
and harnesses. (Figure A)
2.
Remove the panel clips from the factory
radio, then attach them to the 99-3010S
radio trim panel with climate controls.
(Figure B)
Continue to Kit Assembly
Remove shaded area
