95-7377B
3
(Figure A)
(Figure A)
Kit Assembly
Kit Preparation
ISO DDIN radio provision
1.
Attach the
radio brackets
to the
radio using the screws supplied
with the radio. (Figure A)
2.
Locate the factory wiring harness
and connector in the dash and
complete all necessary connections
to the radio. Metra recommends
using the proper mating adapter
from Metra and/or Axxess. Test the
radio for proper operation.
3.
Secure the completed assembly into
the dash using the factory screws.
4.
Snap the
radio trim panel
over the
completed assembly, and then
reassemble the dash in reverse
order of disassembly.
1.
Attach the (2)
panel clips
to the
radio trim panel
as shown.
(Figure A)
Continue to Kit Assembly
