background image

95-7377B

2

Dash Disassembly

1.

  Open the glove box and remove the 

trim at the top of the opening, and 

then remove the (2) Phillips screws 

exposed.  (Figure A)

2.

  Unclip the trim that runs along the 

dash from the right side A/C vent 

to the steering column, and then 

remove the (2) Phillips screws 

securing the A/C vent/hazard panel.  

(Figure B)

3.

  Unclip and remove the right side 

trim panel from the center console, 

and then remove the (1) Phillips 

screw securing the A/C vent/hazard 

panel.  (Figure C)

4.

  Unclip the A/C vent/hazard panel, 

disconnect the hazard switch, and 

then remove the panel.  (Figure D)

5.

  Using caution not to break the 

panel, carefully unclip and remove 

the radio trim panel.  (Figure D)

(Figure B)

(Figure D)

(Figure E)

(Figure A)

(Figure C)

 

Note: There are (8) clips that attach 

the panel to the vehicle: (2) at 

the top-middle, (2) at the bottom 

corners, (2) at the top corners, and 

(2) in the center (these 2 are only in 

non-nav models).

  (Figure E) 

6.

  Remove the (4) Philips screws 

securing the radio and then remove.

 

Continue to Kit Preparation

Summary of Contents for 95-7377B









Reviews: