Metos S29, Installation And Operation Manual, Page: 20 / 24

20
|
11.3.2021
Metos S29
5. Operation
Initial Start-up
Warm-up time of 15 minutes stabilizes the measured values after switching on.
1. Power ON/OFF
Switch on the scale by pressing . The display is switched on and the self test is started.
If you want to switch off press the key again.
2. Zero
Environmental conditions can lead to the balance exactly zero in spite of the pan not taking any strain.
However, you can set the display of your balance to zero any time by pressing
key and therefore
ensure that the weighing starts at zero.
3. Tare
The weight of any container can be tared by pressing button so that with subsequent weighing
the net weight of the object being weighed is always displayed.
• Load weight on the pan.
• Press
key. Zero is displayed, and tare is subtracted. .
• Remove weight from the platform. Tared weight is displayed. It can set only one tare value. It can
display with a minus value.
• Press key. Zero is displayed, tare weight is cleared.
4. 4. Back light Setting
Hold key three seconds in normal weighing mode, display will show “BK-AU”,
Press fto select back light AU/OF, then press key to confirm.
Display Description
Bk AU
Backlight will be turned on, when start to use or when weight is not in zero.
Bk oF
Backlight function will be turned off
Note:If battery gets low,the back light function will not be available.
5. Weighing Units Changing
Press and key together in the weighing mode ,the weighing units can be changed to
kg/g.
6. Extended resolution (x10)
Hold key three seconds in normal weighing mode, the display will show the weight d=0.1e for
5 seconds.