|
13
8.4.2016
METOS Ardox IEC
6. Trobleshooting
If the appliance fails to work, check to ensure that:
• it has been used according to the instructions
• all removable parts are in place
• the main switch (usually on the wall or in the immediate vicinity of the appliance) is in position ON
• the circuit breakers (fuses) have not blown on the fuse board. Ask a qualified person to check the
circuit breakers
Fault
Cause
Corrective action
Insufficient heating of cooking zone
Unsuitable pan material
Use suitable pan material.
Continuous heating of the cooking zone
at maximum power
Knob switch faulty
Check / replace knob switch
Empty cooking zone starts operating
Pan detection faulty
Replace generator/ call service
Small metal objects are heated
Pan detection faulty
Replace generator/ call service
No heating of cooking zone
Pan bottom dia. less than 12 cm
Generator defected
Use suitable pan material
Replace generator/ call service
No reaction of the appliance
Mains fuse / main supply ibnterruted
Check mains connection
Fuses blow when switching on
Short circuit at the generator
Replace generator / call service
The analogue control faults can be detected according to the duration and frequency of the green light
blinking. The green lamp lights one time long and then short regular flashes. The number of these short
flashes is the error number, this pattern is constantly repeated
