Metos CBW 10W, User Manual

Page: 8 / 71

13.5.2011 Rev. 2.2
Safety
2
2. Safety
2.1 Warnings
2.1.1 Installation
• Place the appliance at buffet height and on a firm, level base, in such a way that it
can be connected to the water supply and power supply.
• Connect the appliance to an earthed wall socket.
• Position the appliance in such a way that no damage can be caused if it leaks.
• Do not tilt the appliance, always position and move the appliance upright.
• Connect an overflow pipe to the drainage tube.
• Water always remains in the heating system: for this reason the appliance must not
be placed in an area where the temperature can fall below freezing point.
• When installing the appliance, always observe the local rules and use approved
materials and parts.
• The Installation chapter must again be followed when repositioning the appliance.
• Connect the appliance to the cold water mains.
2.1.2 Use
• Inspect the appliance before using it and check it for damage.
• Never submerge or spray the appliance.
• Do not press the buttons with a sharp object.
• Protect the controls against dirt and grease.
• During use some parts will become very hot.
• Do not position the container on open fire, or hot plate.
• First disconnect the electric cable before transporting the container.
• It is advisable to take the plug out of the socket and close the water tap if the ap-
pliance is not going to be used for longer periods of time
2.1.3 Maintenance and troubleshooting
• Observe the descaling intervals indicated by the descaling indicator symbol.
• Overdue maintenance to the heating system can result in high repair costs and an-
nulment of the guarantee.
• Do not leave the appliance unattended when maintenance is being performed.