Metos CBW 10W, User Manual

Page: 44 / 71

13.5.2011 Rev. 2.2
Operation instructions
38
Changing the selection buttons (Menu 3.4 to 3.7)
You can set each selection button as required with
this function. The four selection buttons are set in
the factory as shown in the table below .
With the help of Buttons 1 to 4 (menu 3.4 to 3.7), the
choice can be set within the scope with associated
step size indicated in the table below.
Set the required amount for button 1 and confirm
your changes with the START button
or go
back without saving any changes by pressing the
STOP button
. Repeat this for buttons 2 to 4.
Have you changed the unit of Litres to Cup or Jug?
The litre setting is automatically calculated by the
relevant litre setting divided by the cup or jug vol-
ume. The four selection buttons then automatically
have the settings as shown in the following over-
view (Table 3 + 4) Each selection button within the
settings scope and associated step size can be set
with the help of the menu buttons 3.4 to 3.7.
Selection buttons unit litres
Model Factory settings Settings
scope
Step
CB 5W 1-3-4-5 l 1-5 l 0,5 l
CB 10W 2,5-5-7,5-10 l 2-10 l 0,5 l
CB 20W 5-10-20-40 l 4-20 l 1 l
Selection buttons unit cups
Model Factory settings Settings
scope
Step
CB 5W 8-24-32-40 8- 4 cups 1 cup
CB 10W 20-40-60-80 20-80 cups 1 cup
CB 20W 40-80-120-160 8- 4 cups 5 cups
Selection buttons unit jugs
Model Factory settings Settings
scope
Step
CB 5W 4-12-16-20 4-20 jugs 1 jug
CB 10W 10-20-30-10 10-40 jugs 1 jug
CB 20W 20-40-60-80 20-80 jugs 1 jug