Metos CBW 10W, User Manual

Page: 59 / 71

13.5.2011 Rev. 2.2
Installation
53
5.7 Electrical connection
Supply voltages and frequencies can differ between countries. Check if the appliance is
suitable for connection to the local power mains. Check if the details on the type plate cor-
respond.
The earthed wall socket and the fused group with a main switch belong to the electrical
installation. No heavy machines that could cause variations in power when being switched
on, can be connected to this group. A machine with power current (three phase) is deliv-
ered from the factory without plug. At delivery, the machine must be provided with an
electrically suitable plug as advised and provided by the installer.
The following points should be observed when wiring a new plug:
1. The green/yellow-coloured wire ("EARTH") should be connected to the terminal
which is either marked with the letter "E", the "earth" symbol (
), or coloured
green or green/yellow.
2. The blue-coloured wire ("NEUTRAL") should be connected to the terminal which
is either marked with the letter "N" or coloured black.
3. The brown-coloured wire ("PHASE") should be connected to the terminal which
is either marked with the letter "L1, L2 and L3" or coloured red.
Green/Yellow Earth (E)
Blue Neutral (N)
3N~400V(5-core cable) Brown Live (L1)
Black Live (L2)
Black Live (L3)
Green/Yellow Earth (E)
Brown Live (L1)
3~230V (4 core cable) Black Live (L2)
Black Live (L3)
Green/Yellow Earth (E)
1N~230V (3 core cable) Blue Neutral (N)
Brown Live (L)