17.12.2004
Rev. 2.0
Operation instructions
6
D If the mixer is equipped with a timer, set the mixing time requred by turning the timer
(fig.1) clockwise. The mixer will stop automatically when the time runs out. When the
mixer has been stopped due to an end of timer, the ”procedure for starting after emergency
stop” is used before the mixer is restarted. Set the timer on HOLD when not used, as oth-
erwise the mixer can not be started.
The mixer must only be started when the bowl is in working position and the safety guard
is closed.
F Turn the speed selector lever (fig.4) to the rear until the required speed has been ob-
tained.
The speed must be changed only when the mixer is running.
The mixer must not be started when loaded in high speed position.
G Before the mixer is stopped, the speed selector lever must be moved back to the lowest
speed (fig.4).
7LPHU
H[WUDHTXLSPHQW
6WDUW
6WRS
(PHUJHQF\VWRS
H[WUDHTXLSPHQW
&IG
)LJ
0L[HUZLWKFORVHG
VDIHW\ JXDUG UDL
VHG ERZO DQG
PRXQWHGWRRO
Summary of Contents for AR 30 MK 1
