Metos 74EPCM Installation And User Manual Download Page 27

Page: 27 / 28

EDITION 003 2042

METOS PROXY ELECTRIC PASTA-COOKER

15 TROUBLESHOOTING

ELECTRIC PASTA COOKER

The appliance does not heat.

Possible causes:

• Defective heating element.
• Defective temperature regulator .

Heating cannot be adjusted..

Possible causes:

• Defective heating element.
• Defective temperature regulator .

Instructions for cleaning

REMINDERS FOR CLEANING

The manufacturer will not be liable for any damage or in-
jury resulting from failure to observe the following rules.

• Disconnect the appliance electrical power supply, if present,

before proceeding with any operation.

• Clean the satin

nish stainless steel exterior surfaces, the

cooking wells and the surface of the hotplates every day.

• At least twice a year, have an authorized technician clean the

internal parts of the appliance.

• Do not use direct or high pressure water jets or steam clean-

ers to clean the appliance.

• Do not use corrosive products to clean the

oor or shelf be-

neath the appliance.

SATIN FINISH STAINLESS STEEL SURFACES

• Clean the surfaces with a cloth or sponge using water and

proprietary non-abrasive detergents. Follow the grain of the
satin

nish. Rinse repeatedly and dry thoroughly.

• Do not use pan scourers or other iron items.
• Do not use chemical products containing chlorine.
• Do not use sharp objects which might scratch and damage

the surfaces.

COOKING WELLS

• Clean the wells by bringing the water to the boil, with the ad-

dition of grease remover detergent if necessary.

• Remove any limescale deposits with a proprietary limescale

remover

Instructions for maintenance

REMINDERS FOR THE MAINTENANCE TECHNICIAN

The manufacturer will not be liable for any damage or injury
resulting from failure to observe the following rules.

• Read this manual carefully. It provides important information

for safe installation, use and maintenance of the appliance.

• Disconnect the appliance electrical power supply, if present,

before proceeding with any operation.

• Installation, conversion to a di

ﬀ

erent type of gas and appli-

ance maintenance must be carried out by quali

ed techni-

cians authorized by the manufacturer, in compliance with
current safety standards and the instructions given in this
manual.

• Identify the speci

c appliance model. The model number is

detailed on the packaging and on the appliance data plate.

• The appliance must be installed in a well-ventilated room.
• Do not obstruct any air vents or drains present on the appli-

ance.

• Do not tamper with appliance components

COMMISSIONING

Following installation or any maintenance operations, check
appliance operation. In the event of any malfunction, consult
the next paragraph “Troubleshooting”.

ELECTRICAL APPLIANCES

Switch on the appliance as directed in the instructions and re-
minders for use given in Chapter “INSTRUCTIONS FOR USE”
and check:

• The current values of each phase.
• The correct operation of the heating elements.