4.2.2004
Rev. 1.0
Installation
18
5.8.2 Connecting a type "Y" power cord to the appliance’s terminal block, models 72/
02VTC, 72/02TVTC, 74/02VTC, and 74/02TVTC
The power cord can only be replaced by the manufacturer, by the manufacturer’s service
or by a technician having similar qualifications (the appliance is supplied complete with
power cord).
To access the power supply terminal block, proceed as follows:
•
disconnect power;
•
remove the knobs shown as item 26 in Fig. 5;
•
unscrew the screws shown as item 25 to remove the front panel.
Fig. 5
25.
Fixing screws
26.
Knobs
Fig. 6
27.
Terminal block
28.
Cable gland
In order to avoid the risk of tearing the power cord, lock it in place using the cable gland
(item 28 in Fig. 6) fitted on the appliance.
The length of the ground (earth) cable should be such as to allow it to suffer any possible
mechanical stress the live leads.
Summary of Contents for 72/02TVTC
