24
|
EDITION 002 2124
METOS PROXY ELECTRIC RANGES
General information
This chapter contains general information which all users of the
manual must be familiar with. Speci
fi
c information for indivual
users of the manual is provided in subsequent chapters (“IN-
STRUCTIONS FOR .... “ ).
1 APPLIANCE
SPECIFICATIONS
• The appliance data plate is located inside the control panel.
• The appliance model and serial number are detailed on de-
cals and on the packaging.
2 GENERAL
PRESCRIPTIONS
The manufacturer will not be liable for any damage or in-
jury resulting from failure to observe the following rules.
REMINDERS FOR THE INSTALLER
• Read this manual carefully. It provides important information
for safe installation, use and maintenance of the appliance.
• Installation, conversion to a di
ff
erent type of gas and appli-
ance maintenance must be carried out by quali
fi
ed techni-
cians authorized by the manufacturer, in compliance with
current safety standards and the instructions given in this
manual.
• Identify the speci
fi
c appliance model. The model number is
detailed on the packaging and on the appliance data plate.
• The appliance must be installed in a well-ventilated room.
• Do not obstruct any air vents or drains present on the appli-
ance.
• Do not tamper with appliance components.
• Appliances of this type are intended for use in commercial
applications such as, for example, the kitchens of restau-
rants, canteens, hospitals and businesses such as bakers,
butchers etc., but they are not intended for the continuous
mass production of food.
REMINDERS FOR THE MAINTENANCE TECHNICIAN
• Read this manual carefully. It provides important information for
safe installation, use and maintenance of the appliance.
• Installation, conversion to a di
ff
erent type of gas and appliance
maintenance must be carried out by quali
fi
ed technicians autho-
rized by the manufacturer, in compliance with current safety stan-
dards and the instructions given in this manual.
• Identify the speci
fi
c appliance model. The model number is detailed
on the packaging and on the appliance data plate.
• The appliance must be installed in a well-ventilated room.
• Do not obstruct any air vents or drains present on the appliance.
• Do not tamper with appliance components .
REMINDERS FOR CLEANING
• Clean the satin
fi
nish stainless steel exterior surfaces, the
cooking wells and the surface of the hotplates every day.
• At least twice a year, have an authorized technician clean the
internal parts of the appliance.
• Do not use direct or high pressure water jets or steam clean-
ers to clean the appliance.
• Do not use corrosive products to clean the
fl
oor or shelf be-
neath the appliance.
4 DISPOSAL OF PACKAGING AND THE APPLIANCE
PACKAGING
The packaging is made using environmentally friendly materi-
als. The plastic recyclable components are:
• the transparent cover and the bags containing the instruc-
tions manual ( made of polyethylene - PE.).
• the straps (in polypropylene - PP).
APPLIANCE
The appliance is manufactured 90% from recyclable metals
(stainless steel, aluminum sheet, copper... ).
The appliance must be scrapped in compliance with current
regulations governing such disposal.
• It must be disposed of properly.
• Make the appliance unusable before scrapping.
5. RISKS DUE TO NOISE
• As regards airborne acoustical noise emissions, the Aweight-
ed sound pressure level is below 70 dB(A).
Summary of Contents for 712ECTPT
Page 28: ...www metos com...
