Rev. 02 - 11/2022
36
+3°C
-18°C
start
stop
-
+
set
L1
L2
L3
L1
L2
L3
SET
DOWN
x4 sec.
UP
x4
SEL
x4 sec.
DOWN+UP
+
x4 sec.
LED with decimal point
function to display the
time.
LED with function of
indicating the negative
blast chilling cycle
selected
steady on: LED which has
the function of indicating
the blast chilling cycle in
progress;
flashing: LED which has
the function of indicating
the storage phase in
progress
DESCRIPTION
Blast chiller start/stop operation
and confirmation
Slow decrease of the value and
buzzer switch off
During a program it displays the
cell probe temperature
Fast decrease of the value and
defrost activation
Slow increase of the value and cell
temperature display
Fast increase of the value and load
activation on the auxiliary output
(UV lamp for sterilization, needle
probe heater or auxiliary condens-
er fan)
Positive/negative alternate
program selection
Display of the elapsed time from
the start of the blast chilling cycle
or the duration of the blast chilling
cycle
until the key is released
Stand-by enable
To access the configuration param-
eters press the
DOWN
and
UP
keys
simultaneously
for 4 seconds
(only with blast chiller in stop phase
or if there are no programs in pro-
gress).
Short press
Short press
Short press
Short press
Continuous press
Long press
Long press
Long press
Long press
USE
