background image

9

WARRANTY

This 34XR Digital Multimeter is warranted against any defects of material or
workmanship within a period of three (3) years following the date of purchase of
the multimeter by the original purchaser or original user.  Any multimeter claimed
to be defective during the warranty period should be returned with proof of
purchase to an authorized Meterman Test Tools Service Center or to the local
Meterman Test Tools dealer or distributor where your multimeter was purchased.
See Repair section for details.  Any implied warranties arising out of the sale of a
Meterman Test Tools multimeter, including but not limited to implied warranties of
merchantability and fitness for a particular purpose, are limited in duration to the
above stated three (3) year period.  Meterman Test Tools shall not be liable for loss
of use of the multimeter or other incidental or consequential damages, expenses, or
economical loss or for any claim or claims for such damage, expenses or
economical loss. Some states do not allow limitations on how long implied
warranties last or the exclusion or limitation of incidental or consequential
damages, so the above limitations or exclusions may not apply to you. This
warranty gives you specific legal rights, and you may also have other rights which
vary from state to state.

Specifications

General Specifications

Display:

 3 ¾ digit liquid crystal display

(LCD)(3999 count) with a 41-segment
analog bar-graph.

Polarity:

 Automatic, positive implied,

negative polarity indication. Overrange: (

0o

)

or (

-0o

) is displayed.

Zero:

 Automatic.

Low battery indication:

 The 

B

 is

displayed when the battery voltage drops
below the operating level.
Aut

o power off:  

Approx. 30 minutes.

Measurement rate:

 2 times per second,

nominal.

Operating environment: 

0 °C to 

4

5 °C at

<70 % R.H.

Storage temperature:

 -20 °C to 60 °C, 0

to 80 % R.H. with battery removed from
meter.

Temperature Coefficient:

 0.1 ×

(specified accuracy) per °C. (0 °C to 18 °C,
28 °C to 

4

5 °C).

Altitude:

 2000 m (6562 feet)

Power:

 Single standard 9-volt battery,

NEDA 1604, JIS 006P, IEC 6F22.

Battery life:

 100 hours typical with

carbon-zinc. 200 hours typical with alkaline.
Frequent use of the backlight will decrease
battery life.

Dimensions:

 196 mm (H) × 92 mm (W) ×

60 mm (D).

Weight:

 Approximately 400 g including

battery.

Box contents:

The 34XR includes the following items:

Test leads w/ alligator clips 1 set
Holster

1

Magnet Strap

1

Temperature Adapter

1

K-type thermocouple

1

Users Manual

1

9 V battery (installed)

1

mA fuse, 0.315 A/ 1000 V

1 spare

Summary of Contents for 34XR























Reviews: