6
OPERATION
7. Edit the File Name in the File Save dialog.
8. Select the location on the computer to save the data.
9. Choose a file format.
10. Click
Save
to start the download.
11. ECH2O Utility will show the progress of the download.
NOTE: Cancel a download in progress using the
Cancel
button. ECH2O Utility does not create a data file if the
download is canceled.
By default, ECH2O Utility saves measurement data as an Excel® Workbook file. Sheet 1
contains processed data (including calibration coefficients used to calculate data), and
Sheet 2 shows raw data. Data can also be saved as .txt or .csv file.
ECH2O Utility will download data in the units chosen in the Preferences dialog. These options
apply only to the Excel Workbook and Processed Data Text file formats.
Data can also be downloaded through the PROCHECK if ECH2O Utility is not functioning
properly. Contact
for more information.
2.5 DELETING DATA
WARNING: Erasing data permanently deletes all data from the PROCHECK. Data is not recoverable.
Follow
through
to erase data.
1. Navigate to the Data tab.
2. Select
Erase
.
3. Press
ENTER in the confirmation screen to erase data.
Press
ESC to cancel.
The screen will return to the Data tab.
2.6 USING A METER SDI-12 ADDRESS
METER sensor cables can be stripped and tinned to use with non-METER loggers. To connect
these sensors back to the PROCHECK or other METER loggers, a pigtail-to-stereo adaptor
cable will be needed. Contact
The SDI-12 address on METER digital sensors may also need to be changed to use
with a non-METER logger. The PROCHECK can be used to change the default METER
SDI-12 address (0). (For more information on SDI-12, see the sensor integrator guide).
To assign the addresses, follow
through
1. Connect the SDI-12 compatible sensor to the PROCHECK stereo port.
NOTE: If the sensor uses bare wires, use the METER pigtail adapter to connect. Contact
2. Navigate to the Configuration tab (