METER PROCHECK, Manual, Page: 8 / 30

5
PROCHECK
2.3 ANNOTATING A READING
Readings can be annotated with a Sample ID, which will be saved and downloaded with that
record. The PROCHECK remembers the last annotation stored into memory.
1. Press
SAVE to show the Annotate screen ( Figure 6 ).
The right side of the screen shows a reading summary and the left side of the screen
shows the annotation field as well as the date and time of the reading.
Figure 6 Annotate a saved reading
2. Use
UP and DOWN arrow buttons to change the current character (A-Z, 0-9, or special
characters ., -,‘, #, or space). Holding down the arrow buttons will scroll quickly between
values.
Press
ENTER to move to the next value. Press ESC to return to a value.
3. Repeat until the last character, pressing SAVE to save the annotation or MENU to return
to the Measurement tab without saving the record.
2.4 DOWNLOADING DATA
METER recommends using the ECH2O Utility to download data. This function transfers all
saved measurement data on the PROCHECK to a computer.
The USB driver should automatically install with ECH2O Utility. If, for some reason it does
not, install the USB driver from the included USB or from
downloads.metergroup.com .
Use the following steps to connect to download data.
1. Launch ECH2O Utility.
2. Use the supplied USB-to-serial cable to connect PROCHECK to an available USB port on
the computer.
3. Choose the correct communication port from the Connect Via dropdown list.
4. Click
Connect
.
5. Click the Download button in the toolbar to download all new data (since the last
download).
6. Alternatively, go to the Data menu and select Download All Data .