WEB’LOG RESIDENTIAL
Qu ick Referen ce Gu id e
meteocontrol GmbH | Spicherer Straße 48 | 86157 Augsburg | Germany | Tel49 (0)821 34666 - 88
3/4
Fax +49 (0)821 34666 - 11 | E-mail [email protected] | Web www.meteocontrol.com
CONNECT THE PORTAL.
Automatic set-up in network with DHCP
Connect the device to the network via
an Ethernet cable plugged into the
Ethernet connection (see "Overview of
interfaces").
The device will be allocated an IP
address automatically and is then set
up.
Manual set-up in network without DHCP
Connect the device to the network via
an Ethernet cable plugged into the
Ethernet connection (see "Overview of
interfaces").
Enter the network settings (IP address
etc.) using the software (see
"Configuration using software").
Check network
Press the "ACTION" button for two
seconds.
STATUS LED 1 (bottom left) is
illuminated permanently when the
portal connection is successful.
Activate Safer’Sun Portal
Scan the QR sticker on the device
using a smartphone and then follow the
instructions.
or
Access
www.meteocontrol.com/registration
via a browser and fill in the registration
form.
Safer’Sun Portal system configuration
Use the portal login on
public.solarmonitoring.net.
Use the cog on the bottom edge of the
page (see illustration below).
Check portal
Press the "ACTION" button for two
seconds.
A connection is created and the status
(e.g. system performance) is sent to
the portal.
If STATUS LED 1 (bottom left) is not
illuminated permanently, no portal
connection is possible.
Open the portal page.
Check the icons on the bottom edge of
the page (see illustration below).
PORTAL ACCESS
Safer’Sun Public:
public.solarmonitoring.net
