WEB’LOG RESIDENTIAL
Qu ick Referen ce Gu id e
meteocontrol GmbH | Spicherer Straße 48 | 86157 Augsburg | Germany | Tel49 (0)821 34666 - 88 (Support)
2/4
Fax +49 (0)821 34666 - 11| E-mail [email protected] | Web www.meteocontrol.com
OVERVIEW OF INTERFACES
1 Power Control switch
2 Digital-in for ripple control receiver
(RJ45 socket)
3 Ethernet connection
4 RS485/422 for inverter (RJ12
socket)
5 Connecting the power supply
6 Micro USB
CONNECTING A DANFOSS INVERTER
INFORMATION
For details of the bus layout, please
see the inverter manual.
To connect the inverter, use a pre-
configured meteocontrol Connect
cable or make your own cable
based on the layout above.
We recommend that you use a
UNITRONIC® Li2YCYv (TP) cable
from "Lapp Kabel" or an equivalent
cable type. This cable is suitable
for laying in soil.
Connect the inverter via the RJ12
socket (4).
If no inverters have been installed
yet, an inverter search will begin
automatically when the device starts
up (lower STATUS LEDs flash).
You can search manually via the
device menu (see "WEB’log
Residential" Quick Reference Guide)
or using the Device Management
Tools software (see "WEB'log
Residential Manager").
Check the status of the inverters via
the device menu (see "WEB’log
Residential" Quick Reference Guide)
or using the Device Management
Tools software (see "Configuration
using software").
