PN T900-014, Rev B
Working From the Run Mode Screen
After the ta7000F has warmed up to normal operating temperature, press the
Run
key to view the
Main Menu
screen. The upper-left corner of the screen
will display “
Idle Mode
” to indicate the ta7000F is not measuring or perform-
ing any other actions.
Figure 2-8.1.
Run Mode screen.
Run Mode 235
12:55:30
CH
4
= 2.7
CO
2
= 6.1
NHMC = 0.8
Idle Page
Cycle Run
Figure 2-7.3.
Main Menu screen.
12:39:30
CH
4
=
CO
2
=
NHMC =
Idle Mode
Page
Run Cool Calib Blank
Next, to initiate automatic operation of the ta7000F, press the
Run
key again.
The upper-left corner of the screen will change to display “
Run Mode
” to indi-
cate the ta7000F is now performing a
Cycle Run
. “
Idle
” is now displayed in the
lower-left corner of the screen (see Figure 2-8.1).
The ta7000F will display the time left (in seconds) for the current cycle in the
Status Bar, next to
Run Mode
(see Figure 2-8.2). The results will be updated on
the screen as the concentration is determined.
Installation and Start-Up
|
2-19
