Metek Apollo XF Octane, User Manual

Page: 14 / 25

Basic Detector Operation
Octane Basic User Guide
Page 14 of 25
4.2.1 STATUS LEDS
There are two status LEDs located on the back panel of the detector. They function as follows:
Status 1 LED Indication Status 2 LED Indication
RED Warm RED Not ramping
Blinks YELLOW Cooling Blinks YELLOW Cooling
Blinks GREEN Near Operating Temp Blinks GREEN Ramping
GREEN At Operating Temp
Blinks RED Warming
Table 4 - Status LEDs definitions
When the detector is first powered ON both Status lights on the detector back panel will light RED.

There is a Yellow LED that should be lit at the Ethernet connection when powered ON.

There is a Green LED that will flash at the Ethernet connection when connected to the
Network board in the PC. This should be flashing rapidly (i.e. 10 flashes /sec) and continuously
before starting the Genesis or TEAM software.
Figure 2 - Detector Status Lights
Status LEDs