10
Reassembly After Cleaning
Reassembling the sharpener
•
Reposition the sharpener by inserting the
locking tie rod (1) and turn screw until tight
(2)
•
Close the sharpener cover (3)
Reassembling the slice deflector
•
Carefully return the slice deflector to its
original position, fitting it in the plastic
support.
Reassembling the centre plate
•
Insert the centre plate over the knife and
ensure that the square section joint is in its
proper place.
•
Insert the centre plate spindle completely and
rotate clockwise to secure.
Reassembling the table
•
Insert the table on the carriage
•
Tighten the table locking knob
•
Check that the table moves freely from left to
right
•
Check that the thickness selection knob works
correctly
