9
Disassembling the slice deflector
•
Squeeze the tab and remove the slice deflector
in the direction as shown below.
Disassembling the sharpener
•
Lift the sharpener cover.
•
Loosen the side knob of the sharpener block
and remove it.
•
Then remove the whole sharpener by pulling
it upwards from the slicer.
Cleaning
•
Only use warm water and a mild detergent to
clean all parts, using a soft, spongy cloth and
nylon brush.
•
Do not use other metal products to scrape or
remove stubborn deposits of sliced product.
•
Never leave any leftover product on the slicer
(Clean at least once a day).
•
DO NOT clean the unit, or any parts of the unit
in a dishwasher.
•
Rinse all parts after cleaning with clean water
and dry with a soft cloth.
•
Do not use abrasive cleaners, acids, steel wool
or high-pressure water jets which might
damage the machine.
Cleaning the knife
•
To clean the knife whilst still on the machine,
use a damp cloth on the blade and move it
slowly from the centre outwards to the edge.
•
Dry the knife in the same way.
Cleaning the back knife guard
•
To clean the back knife guard, pass a damp cloth
between the blade and the back knife guard.
Cleaning the machine body
•
Clean the machine body with a damp cloth or
sponge, rinsing frequently with hot water. Dry
carefully.
