background image

1

2

GB

9

GB

Practice staff / technicians

Page

GB

Practice personnel / technicians

Storage and transportation conditions
Installation guidelines

10. Storage and transportation conditions:

The compressor is dispatched by the manufacturer in a carton 
on a non-returnable pallet to protect the appliance from damage 
during transportation. Wherever possible, the original packaging 
should always be used for transportation. Therefore it is advised 
to keep the original packaging. 

During transportation the compressor must be protected 
from moisture, dirt and extreme temperatures.  The packaged 
compressors must be stored in a dry place to protect it from 
humidity (max. relative air humidity: 70%). Storage temperature 
must be between -10°C and +40°C.

 The compressor may only be transported unpressurised. 
Before it is transported, it is essential that the com-
pressed air from the pressure tank and pressure hoses 
is released and any condensate water is drained off.

11. Installation guidelines:

Unpack the compressor and check carefully to ensure that it is in 
perfect condition. Assemble the support legs as supplied (see 
illustration 

1

).

The compressor may only be installed and operated in a dry, 
well-ventilated and low-dust location. If there is insufficient air 
flow, a suction device or ventilator of the correct dimensions 
must be installed. The ambient temperature must be between 
+5°C and +40°C. 

The motor fan ensures that the power unit is force-cooled 
effectively. However, for this to happen, the air must be able to 
flow in and out without obstructions. If this is not the case, a 
separate ventilation system must be installed (see illustration 

2

).

The compressor must be installed in such a way that it is easily 
accessible for operation and maintenance. The compressor must 
be placed on a level floor which is sufficiently robust.

The compressor must not touch any other objects due to heat 
development.

It is not necessary to provide a special foundation or base. 
The compressor may simply be placed on a level floor. If the 
compressor is fitted in a mounting bracket, then the mounting 
bracket should not be secured to the ground. It is recommended 
to attach four vibration dampers.

Summary of Contents for META Air

























Reviews: