MetalMaster SJM-2.5, Operation Manual

Page: 31 / 31

Manager:
www
.machineryhouse.com.au
www
.machineryhouse.co.nz
12th March 2012
All electrical enclosures should only be opened with a tool that is not to be kept with the machine. W
ear hearing protection as required.
Machine should be installed & checked by a Licensed Electrician. Ensure area is kept clear of material being rolled.
Revised Date:
W
ear gloves to prevent cuts from material.
OTHER HAZARDS, NOISE.
Hands should be kept clear of moving parts such as rolls etc.
LOW
Risk Control Strategies
(Recommended for Purchase / Buyer / User)
Secure & support work material. Eliminate, avoid loose clothing / Long hair etc.
Assessment
Do not adjust or clean until the machine has fully stopped. Isolate power to machine prior to any checks or maintenance being carried out.
ENT
ANGLEMENT
CUTTING, ST
ABBING,
Ensure machine is bolted down.
A
HIGH
Make sure all guards are secured shut when machine is on.
ELECTRICAL
D
MEDIUM MEDIUM
PLANT SAFETY
PROGRAM
No.
Hazard
Identification
Developed in Co-operation Between
A.W
.I.S.A
and
Australia Chamber of Manufactures
This program is based upon the Safe W
ork
Australia, Code of Practice - Managing Risks of Plant in the W
orkplace ( WHSA
201
1 No10 )
Safety of
ficer:
O
Item
B
Authorised and signed by:
F
H
STRIKING
MEDIUM
Plant Safety Program to be read in conjunction with manufactures instructions
Hazard
NEW
MACHINER
Y
HAZARD IDENTIFICA
TION,
ASSESSMENT & CONTROL
SHEARING
MEDIUM
Isolate power to machine when checks or maintenance is being carried out.
Sw
a
ge & J
enny Mac
hine
C
PUNCTURING.
LOW
CRUSHING