21. QuickDraw Advanced
If you would like to modify or edit a job you busy drawing up, there are a number of options:
Grid Size:
The size of the grid squares
can be altered by changing the value in
the bottom left corner.
Edit:
After pressing this you can see red dots
On each corner, press one you want to move
and it will highlight then press again to the
point you want to move it.
Undo:
This will undo the last action.
Clear:
Deletes all data and start again
22. Change Tensile strength correction
If large trim values are necessary due to tensile strength, enter a percentage tensile correction
on the DIE screen.
You can either directly enter a percentage by pressing on the Tensile correction button and
enter on the popup keypad or press Auto Correction, enter the desired angle as prompted and
then resulted angle. It automatically enters a tensile correction. When a job is saved, it saves
the tensile correction for that job.
Page 15
Instruction Manual for PB-70B (S902F)
04/12/2014
