manualshive.com logo in svg

Metallkraft RBM 610-8, Operating Instructions Manual, Page: 4 / 30

Share
Download
Metallkraft RBM 610-8 Operating Instructions Manual Download Page 4

Safety

03.05.2018

page 4

Safety  Plate rolling machine RBM 610-8  ; Version 1.05

 ©

 20
18

GB

1

Safety

Conventions of presentation

This part of the operating instructions

Explains the meaning and use of the warnings in this manual,

specifies the intended use of the bending machine,

Draws attention to the dangers that could arise for you and others if these instructions are 
not followed,

informs you about how to avoid dangers.

Please note in addition to the operating instructions

the applicable laws and regulations,

the legal regulations for accident prevention,

the prohibition, warning and mandatory signs as well as the warnings on the bending 
machine.

A nameplate is attached to the machine, which contains the name of the machine, the article
number and the most important technical data. Always keep it clean and in a readable condition.

Always keep the documentation near the bender.

INFORMATION

Stürmer Maschinen GmbH

Dr.-Robert-Pfleger-Str. 26

D-96103 Hallstadt

Phone: +49 (0) 951 96 555 - 0 

gives additional hints 

calls you to action

enumerations

Summary of Contents for RBM 610-8































Reviews:

No comments