Assembly
03.05.2018
page 13
Assembly Plate rolling machine RBM 610-8 ; Version 1.05
©
2018
GB
Protruding parts - such as stops, handles, etc. - are to be secured if necessary by on-site
measures so that persons are not endangered.
Provide enough space for set-up and operating personnel and material transport.
Also consider the accessibility for adjustment and maintenance work.
Ensure adequate lighting (minimum value: 500 lux, measured at the tip of the tool). With
lower illuminance, additional lighting must be ensured, for example by means of a separate
workplace luminaire.
3.4.2
Mounting the round bending machine
WARNING!
Danger of crushing when assembling, mounting and straightening the machine com-
ponents.
WARNING!
Risk of crushing and tipping. The erection of the bending machine must be carried out by
at least 2 persons.
INFORMATION
The Machine will be delivered already assembled.
3.5
Set up
‘
Check the surface of the bender with a spirit level for horizontal alignment.
‘
Check the substrate for sufficient load capacity and rigidity.
‘
Place the round bending machine on the intended surface.
‘
Attach the round bender to the provided through holes on the machine base.
WARNING!
The nature of the substrate and the method of fixing the machine base with the substrate
must be able to absorb the stresses of the round bending machine. The substrate must
be at ground level. Check the base of the bender with a spirit level for horizontal
alignment.
3.5.1
Fixing
In order to achieve the required stability
of the round bending machines, the
round bending machine must be firmly
connected to the base at its base.
We recommend the use of composite
anchor cartridges or heavy duty
anchors.
‘
Attach the round bender to the provi-
ded through holes on the base with
the substrate.
Fig.3-1: Fasten
Through Hole