Technical Data
03.05.2018
page 11
Technical Data Plate rolling machine RBM 610-8 ; Version 1.05
©
2018
GB
2
Technical Data
The following data are dimensional and weight specifications and the machine data approved by
the manufacturer
* Bending power ratings refer to S235JR with a tensile strength of 400 N / mm²
* Sheet bending capacity in VA = factor 0.75; Conical bending with half of the max. Sheet thickness possible
2.1
Machine data
RBM 610 - 8
Max. working width [mm]
610
Max. sheet thickness [mm]
0,80
Roller Ø [mm]
38
Bending Ø min. min.
60
Weight [kg]
37
Dimensions LxBxH [mm]
885x220x340
2.2
Environmental
conditions
Temperature
5 - 35 °C
Relative humidity
25 - 80 %
Stretch limit
Example of the RBM 3030-60 E Pro
Roll diameter:
220 mm
Previous bending capacity:
4 mm
Bending Capacity:
6 mm
Material with a yield strength of 470 N / mm2 up to one
Diameter 660 mm with a thickness of 2 mm
Material with a yield strength of 235 N / mm2 up to one
Diameter 660 mm with a thickness of 3 mm
Material with a yield strength 175 N / mm2 up to one
Diameter 660 mm with a thickness of 4 mm
The conical bending can be done easily.
t = Bending capacity
(Material
thickness) Ratio
of conical
bending
Conical bending as a function of the bending capacity
Note: The values have been increased accordingly 3 times the roll diameter
