Spare parts
PRM F | Version 1.07 | EN
35
12.1 Spare parts order
The spare parts can be obtained from the dealer or directly from the manu-
facturer. The contact details are in chapter 1.2 Customer Service.
Specify the following key data for inquiries or when ordering spare parts:
- Machine type
- Item number
- Position number
- Construction year
- Amount
- Desired shipping method (post, freight, sea, air, express)
- Delivery address
Spare parts orders without above given information can not be considered. If the
shipping method is missing, shipping will be at the discretion of the supplier.
Information on the machine type, article number and year of manufacture can
be found on the nameplate, which is attached to the machine.
Example:
The upper shaft for the ring bending machine PRM 30 F has to be ordered.
This is indicated in the spare part drawing 2 with the item number 18.
By ordering spare parts, send a copy of the spare parts drawing (2) with the
marked part (shaft) and marked positon number (18) to the dealer or spare
parts department and provide the following information:
Type of machine:
Ring Bending MachinePRM 30 F
Item number:
381 2030
Drawing number:
2
Position number:
18
Item number of the machine:
Ring Bending Machine PRM 30 F:
381 2030
Ring Bending MachinePRM 31 F:
381 2031
Ring Bending Machine PRM 35 F:
381 2035
Summary of Contents for PRM 30 F
Page 1: ...PRM 30 F Operating Instructions PRM 30 F PRM F Ring Bending Machine PRM 31 F PRM 35 F...
Page 30: ...30 PRM F Version 1 07 EN Operation 9 7 Bending tolerances of different profiles...
Page 37: ...Spare parts PRM F Version 1 07 EN 37 Fig 27 Spare parts drawing 2 PRM 30 F...
Page 48: ...www metallkraft de...