Assembly
PRM F | Version 1.07 | EN
17
PRM 35 F
The following dimensions should be taken into account at the place of installa-
tion or at the workplace (Fig. 9)
Fig. 9: Space requirement of the ring bending machine PRM 35 F-left vertical operation, right horizontal operations
- Space in front of and behind the machine: 1000 mm
- Distance from the side of the machine to the wall: at least 1000 mm -
depends on the sizes of the materials to be bent
This area may only be entered by the operator of the machine!
Hazardous areas on the machine
Fig. 10: Hazardous areas on the ring bending machine
A - Inside the machine, hydraulic system,Power supply and drive
B - Working area of the machine at the clamping points of the rollers
C - Electric box on the side of the machine, power supply
WARNING!
Never bring any part of the body close to these danger
zones when the machine is in operation!
Summary of Contents for PRM 30 F
Page 1: ...PRM 30 F Operating Instructions PRM 30 F PRM F Ring Bending Machine PRM 31 F PRM 35 F...
Page 30: ...30 PRM F Version 1 07 EN Operation 9 7 Bending tolerances of different profiles...
Page 37: ...Spare parts PRM F Version 1 07 EN 37 Fig 27 Spare parts drawing 2 PRM 30 F...
Page 48: ...www metallkraft de...
