Metallkraft 4450116, Operating Instructions Manual

Page: 9 / 22

Description of device
GS-E Series | Version 1.09 9
6 Description of device
6.1 Representation
Illustrations in these operating instructions are for
basic understanding and may differ from the actual
design.
Fig. 3: Description of thread tapping machine GS 1100-16 E
1 Extension arm
2 Tap head
3 Control panel
4 Machine carrier
5 ON/OFF switch
6 Operation keys of the tap: forward run (tapping), re-
verse run (retraction of the tap)
Scope of delivery:
- Thread Tapping Machine
- Operating instruction
-
GS 1100-16 E
: 8 x Tapping chuck GT12 (M3, M4,
M5-6, M8, M10, M12, M14, M16)
-
GS 1200-24 E
: 9 x Tapping chuck GT24 (M6, M8,
M10, M12, M14, M16, M18, M20, M22-24)
-
GS 1200-36 E
: 13 x Tapping chuck GT24 (M6, M8,
M10, M12, M14, M16, M18, M20, M22-24, M27, M30,
M33, M36)
Accessories (not included)
4460005
Substructure
for threading machines (Fig. 4)
900x600x875 mm
4460010
Magnet foot
for GS 1000-12P & GS 1100-16E
4460011
Magnet foot
for GS 1200-24E & GS 1200-36E
Fig. 4: Accessories - substructure for threading machines
7 Assembly
Please check the parts carefully against the packing list.
Then assemble them as described in the following steps.
Step 1: Carefully remove the machine parts from the
packaging.
Step 2: Select a suitable assembly table that is flat and
stable and provides sufficient working space.
Suitable work tables can be ordered from
METALLKRAFT as optional accessories.
Step 3: Mount the machine carrier. Align the machine
support with the screw holes on the worktable
and fit the four screws. If you have not purcha-
sed a METALLKRAFT worktable, you will have
to drill four mounting holes on the worktable itself
(see diagram „Mounting holes for the machine
carrier“, Fig. 5).
Step 4: Adjust the height limit ring.
Adjust the height according to the actual conditi-
ons and tighten the screws on the limiting ring.
Step 5: Guide the copper sleeve on the underside of the
machine of the machine into the optical axis of
the machine carrier so that the lower copper
sleeve copper sleeve is close to the limiting ring.
is located.
1
4
2
3
5
Gewinde-Auswahl
Gewindetiefe
Geschwindigkeit
Drehmoment Ist-Wert Tiefe
Rücklauf-
geschwindigkeit
Gewindesteigung
Zähler
Benutzer-
parameter Maschinen-
parameter
Tiefbohrloch-
Betrieb Allgemeiner
Betrieb
Löschen
Control panel
6