16
RBM 1305-15 E | Version 1.02
Disposal, recycling of used devices
11 Disposal, recycling of used devices
Please take care in your own interest and in the interest
of the environment that all component parts of the ma-
chine are only disposed of in the intended and permit-
ted way.
11.1 Decommissioning
Immediately decommission disused machines in order
to avoid later misuse and endangering of the environ-
ment or personal safety.
- Eliminate all environmentally hazardous operating ma-
terials from the used device.
- If required, disassemble the machine into easy-to-han-
dle and usable components and parts.
- Dispose of machine components and operating mate-
rials by the disposal channels provided.
11.2 Disposal of lubricants
Remove any leaking, used or excessive grease at the lu-
bricating points.
Disposal notes for used lubricants are available from the
manufacturer of the lubricants. If necessary, request the
product-specific data sheets. The disposal instructions
for the lubricants used are provided by the lubricant
manufacturer. If necessary, ask for the product-specific
data sheets.
12 Spare parts
12.1 Ordering spare parts
The spare parts may be purchased with the authorized
dealer or directly with the manufacturer. Please find the
corresponding contact data in Chapter 1.2 Customer
service.
Indicate the following basic information for requests or
orders of spare parts:
- Type of device
- Item No.
- Position No
- Year of construction:
- Quantity
- Required mode of dispatch (mail, freight, sea, air,
express)
- Address of dispatch
Spare part orders which do not include the above indi-
cations may not be taken into consideration. If the indi-
cations regarding the mode of dispatch are missing, the
product is dispatched at the discretion of the supplier.
You will find information regarding the device type, item
No. and year of manufacture on the type plate fixed to
the bending Machine.
Example
The motor for the bending machine RBM 1305-15 E
must be ordered. This is indicated in the spare parts
drawing with the item number 111.
When ordering spare parts, send a copy of the spare
parts drawing with the marked component ( motor ) and
marked position number (111) to the authorised dealer
or to the spare parts department and provide the follow-
ing information:
- Device type:
Bending Machine
- Item number:
3781305
- Position number:
1
11
The item number of your device:
Bending machine RBM 1305-15E : 3781305
DANGER!
Danger of injury by the use of
wrong spare parts!
Dangers may result for the user and damages as
well as malfunctions may be caused by using wrong
or damaged spare parts.
- Only use original spare parts of the manufacturer or
spare parts admitted by the manufacturer.
- Always contact the manufacturer in case of uncer-
tainties.
NOTE!
Using non-approved spare parts voids the manufac-
turer's warranty.
