5. Keyboard tray height adjustment.
6. Monitor rail height and resistance
adjustment.
When assembly is complete, peel off the safety
tape from the handle (figure 1).
To unlock, pull the handle out (figure 2) and
rotate 90 degrees (figure 3).
Adjust the keyboard tray to the desired height.
To lock, turn the handle back to the horizontal
position and push it back in.
Monitor height can be freely adjusted using the
loop handle.
If the monitors are very light or very heavy and
the spring does not balance the weight of the
monitors there is a friction adjustment.
Align the hole in the column with the monitor
rail bracket and adjust the screw with the hex
key provided.
7. Cable Management.
figure 1
figure 3
figure 2
Route the cables through the
cable clips, up the back of the
column and through the clips
on the monitor rail.
NOTE:
Ensure there is enough
slack in the cable to allow full
adjustment up and down.
