ULTD_WHE_2S3S_01
13
8
Convection air connection
The fireplace needs a convection system. To this end, a metal casing is mounted around the hearth
frame. This is the convection mantle. The air in the room passes underneath the convection mantle
and returns along the upper surface where it is heated, and then returns into the room.
There are Ø150mm connection openings on both sides as well as on the back to connect the supply
of air in the room. There is also a free space of 50 mm at the bottom of the appliance through which
the air in the room can be channelled.
At least 4 connection openings for the convection air must be cleared at the bottom of the hearth.
Ensure that this is done symmetrically.
The pre-cut Ø150 mm plates can be removed by tapping them. The connector flanges can then be
mounted on the convection mantle using self-tapping screws.
Rear suction connection for convection air (4x)
Top outlet
connection for
convection air
