ULTD_WHE_2S3S_01
7
2
Introduction
Please read this manual carefully before using the fireplace for the first time.
These appliances are closed wood fireplaces which must be connected to an individual flue pipe. Flue
gases are discharged through this flue pipe. The supply of outdoor air for combustion can be
connected directly to the base of the appliance. This allows these appliances to function
independently of air in the room.
3
Safety
This appliance has been tested according to
EN 13229-2001
and
EN 13229-A2:2004
standards.
3.1
Safety instructions for the installer
THE INSTALLATION OF THIS WOOD FIREPLACE MAY ONLY BE CARRIED OUT BY A
RECOGNISED INSTALLER, IN ACCORDANCE WITH APPLICABLE NATIONAL
AND/OR LOCAL STANDARDS AND BUILDING REGULATIONS.
IT IS IMPORTANT THAT THE FLUE GAS PIPE AND THE FRESH AIR SUPPLY PIPE OF
THIS WOOD FIREPLACE ARE ONLY CONNECTED BY A QUALIFIED INSTALLER, IN
ACCORDANCE WITH NATIONAL AND LOCAL REGULATIONS.
Take the necessary precautions so that items in the immediate vicinity of the appliance are not
overheated. This means using incombustible materials for items such as the curtains, floor and walls.
The installer must take all measures required to prevent overheating of adjacent materials. These
measures must comply with national and/or local standards and regulations and the installation must
meet all (national and European) standards. Take the necessary measures by using fireproof and
insulating materials to prevent overheating of flammable materials in the vicinity of the fireplace. See
Table 1 on p.9 for the minimum insulation thicknesses.
