Maintenance Section
If maintenance/welding is required check with Metalcraft for product
updates or for proper procedures.
Where possible all fasteners on Metalcraft scrapers are grade 8.
When replacing fasteners use grade 8 or better.
Bias tires should be inflated to 60 psi.
Maintenance Schedule
When Required
Replace cutting edges and router bits.
Replace or adjust ejector wear blocks and rollers.
Daily
Walk around inspection.
Lubricate hitch.
Every 50 Hours or Monthly
Check tire inflation.
Every 250 Hours or Monthly
Check and grease wheel bearings.
Check and grease oscillator bearings.
Check hitch for wear.
Check all pivot bushing for wear.
Every 2000 Hours or Yearly
Repack wheel bearings.
Repack oscillator bearings.
Note: Only perform maintenance after park brake has been set
and wheels are properly chocked. Always use safety lock out
valves on cylinders and use proper blocking techniques when
performing any maintenance on your machine.
