3
ENG
TECHNICAL INFORMATION
Electrical accumulation water heaters are designed to work
with pressure of the water supply pipeline. The appliance is not meant
for persons (including children) of reduced psychophysical abilities,
unless under supervision of persons responsable for their safety, i.e.
for persons not skilled for use of the appliance. Improper use of the
appliance, especially from the side of children, should be prevented.
Water heaters are made according to valid standards and tested and
certified by authorized laboratory. Product technical characteristics
are given on the sticker „Table with Characteristics“ between connec-
tion pipes.
Picture 1 shows design of the water heater with all parts
1. Housing
2. Polyurethane insulation
3 Heating tank (enamelled)
4 Screw, seal, nut, washer
5 Heater with seal
6 Flange
7 Flange sealing rubber
8 Counter-flange
9 Thermoregulator
10 Mg-anode
11 Connection tube for water
12 Rings
13 Connection tube for hot water output
14 Signal lamp
15 Thermoregulator button
16 Thermometer
17 Support for hanging to wall
18 Screws for support
Picture 1
