background image

Operating this Mini Bike at excessive 

speeds could be hazardous.
Riding at excessive speeds increases your 

chances of losing control of the

Mini Bike, which could result in severe 

injury or death. 
Always go at a speed that is proper for the 

terrain, visibility, operating conditions, 

operator skill, and operator experience.  

Always know the terrain before riding. 

!

WARNING

Removing hands from the handlebars 

and/or feet from the footrest while 

operating the Mini Bike could be 

hazardous.   
Removing both or one hand from the 

handlebars and/or feet from the footrests 

could result in loss of control of the Mini 

Bike resulting in severe injury or death.
Always ride with both hands on the 

handlebars and both feet on the footrests 

while operating the Mini Bike.

!

WARNING

STARTING OFF

1.  Start and warm up the engine 

according to the instructions in this 

manual. 

2.   Place the side kick stand in the up 

position. 

3.  Apply the throttle gradually to start 

riding.    Practice riding mini bike on a flat 

dirt surface that has plenty of room for 

turning.  

Turning the throttle grip to full throttle 

when starting off could be hazardous.  
The Mini Bike could lurch forward causing 

the front wheels to leave the ground 

causing loss of control.
Always open the throttle gradually when 

starting off from a stopped position. 

!

WARNING

RIDING THE MINI BIKE

14

Braking while turning could be hazardous.

 

Braking while turning could cause the Mini 

Bike to slide out of control which could  

result in severe injury or death.
Before making a turn,  slow down and 

release the brake.   

!

WARNING

Summary of Contents for Mini Metal









































Reviews: