Page of 24
7
DESCRIPTION
METAL MAN FC130i 120 volt input, 130 amp DC output flux core only wire feed welders is
economical and easy to use. It requires no shielding gas and welds 8 gauge to 3/16" mild steel
materials with .030" or .035" flux core wires on 4" or 8" spools. This unit features a dialed voltage
range, a set up chart, a cooling fan, trigger activated arc, overload protection, 8-1/2 ft torch with
Tweco style series 11 replacement parts and 6 ft ground cable and clamp.
The FC130i is ideal for
use when welding mild steel 18 gauge to 3/16” for light industrial applications (
FOR USE WITH
FLUX CORE WIRE ONLY
).
ON/OFF Switch
(Not displayed) In the “OFF” position no power is being supplied to the torch. In the “ON” position
power is supplied to the Inverter Engine and control circuit.
Voltage Setting
Set output voltage. Refer to the “set up” chart inside the wire feed compartment.
Wire Speed Control
Adjustment of the wire feed speed (amperage).
Ground Cable and Clamp
The ground cable and clamp are attached to the work piece to complete the circuit allowing the flow
of current needed to weld.
Voltage
Setting
Wire Speed
Control
Ground Cable
And Clamp
Torch
Power Light
Power
Cord
Chipping hammer
with brush
Extra Contact Tips
Alarm Light
Summary of Contents for FC130i
Page 20: ...Page of 24 20 ELECTRICAL DIAGRAM...
