Metal-Fach GHT, Operation And Maintenance Documentation

Page: 4 / 32

3
1 . INTRODUCTION
1.1. Markings
Please take the time to read this manual. This will enable you to get to know the boiler better and
to understand its operation. Adaptation to the requirements, recommendations and advice
contained herein will allow you to operate your boiler for a long, trouble-free and, above all, safe.
The device shall be unambiguously and declaratively marked on name plates permanently affixed
in a visible position.
In the description of the user manual, additional markings are used, which should be read as:
Important information related to the safety of boiler operation and use.
Information relevant to the operation as recommended by the manufacturer.
The manufacturer of the boiler is a company:
METAL-FACH Heating Technology
Jacek Kucharewicz
Information and pictograms
The following information pictograms have been used to mark dangerous places on the device.
These operating instructions are an integral part of the device and serve to guarantee its correct
and safe operation. It contains safety instructions which must be observed for transportation,
storage, installation, technical acceptance, operation and maintenance of the boiler.
No part of this document or parts thereof may be copied or transmitted to a third party
without the express permission of the manufacturer. The device is protected by a patent
issued by the Patent Office of the Republic of Poland No. 227736 for the invention entitled
Piston Feeder of central heating boiler.
All activities related to the attempt to copy the
device will constitute the basis for initiating court proceedings.