9
ENGLISH
1.
Put socket on the drive.
2.
Set direction of rotation with the
reversing knob:
reversing knob set to the right:
forward/driving
reversing knob set to the left:
reverse/removing
3.
To set the torque with the reversing
knob:
reversing knob set fully to the
right (or left) = maximum torque.
reversing knob gradually to the
left (or right) = torque is reduced.
4.
Adjust working pressure at the com-
pressor (see Technical Specificati-
ons for max. permissible working
pressure).
5.
Connect quick coupler to the air
supply.
6.
Pull trigger to start.
A
Danger!
Always disconnect from air supply
before servicing.
Repair and maintenance work other
than described in this section must
be carried out by qualified specialists
only .
Check all screwed connections for
tightness, tighten if necessary.
When the tool is not lubricated by a
service unit or line oiler, manually
add 3 - 5 drops of pneumatic oil for
every 15 minutes of operation (con-
tinuous operation) into the air inlet.
Never store the tool outdoors, in
unprotected areas or in damp locati-
ons.
Pneumatic oil 0.5 litre
Special lubricant for air tools, ser-
vice units and line oilers.
Stock-no. 090 100 8540
Line oiler R1/4" female
For fitting directly to air tools. Oil
level can always be checked
through sight glass.
Stock-no. 090 105 4584
Line oiler R3/8" female
For fitting directly to air tools. Oil
level can always be checked
through sight glass.
Stock-no. 090 105 4592
Swivel-type air inlet
DKG 1/4"
For fitting directly to air tools. Impro-
ves tool manoeuverability.
Stock-no. 090 106 0991
Socket set 1/2"
consisting of 10 sockets
(10, 11,12, 13, 15, 17, 19, 21, 22,
24 mm)
Stock-no. 090 101 0021
Socket set 3/8"
consisting of 8 sockets
(10, 11,12, 13, 14, 15, 17, 19 mm)
Stock-no. 090 xxx xxxx
A
Danger!
Repairs to air tools must be carried
out by qualified specialists ONLY!
Air tools in need of repair can be send to
the service centre in your country. See
Spare Parts List for address.
Please attach a description of the fault to
the air tool.
The tool's packaging materials are
100 % recyclable.
Worn out machines and accessories
contain considerable amounts of valu-
able raw and plastic materials, which
can be recycled.
These instructions are printed on paper
produced with elemental chlorine free
bleaching process.
5.
Care and Maintenance
6.
Available Accessories
7.
Repairs
8.
Environmental Protection
9.
Technical Specifications
Model
SR 1250 K
SR 2850 K
Air consumption
l/min
300
400
Max. permissible working pressure
bar
6,2
6,2
Speed
min
-1
10000
7700
Square drive
"
3/8
1/2
Maximum bolt size
M16
M16
Impact mechanism
jumbo hammer
twin hammer
Maximum torque (forward)
Nm
250
690
Maximum torque (reverse)
Nm
250
690
Minimum hose size (inner)
mm
10
10
Vibration (effective value of weighted acceleration)
Uncertainty K
m/s
2
m/s
2
2.99
1.5
4.31
2.51
EN ISO 15744:2008 (ISO 15744:2002)
Sound power level L
WA
Sound pressure level L
PA
Uncertainty K
dB (A)
dB (A)
dB (A)
110.0
97.7
4.0
110.8
98.5
4.0
Dimensions:
length x width x height
mm
160 x 55 x 170
185 x 70 x 195
Weight
kg
1.08
1.94
