Z.I. Les Bosses
F-26800 ETOILE-SUR-RHONE
www.axxair.com
- 15 -
English
OPERATING INSTRUCTIONS:
1
SAFETY INSTRUCTIONS:
WARNING:
In order to reduce all risks of possible body harm when using electric equipment. PLEASE
READ THESE INSTRUCTIONS THOROUGHLY BEFORE USING THE MACHINES. Keep these safety
instructions.
The machine must only be used by qualified technicians who have been trained to use the equipment.
This machine should be used only for the job for which it was designed.
Keep your working area tidy. Untidiness increases the risks of accidents.
Consider the work area environment in which you use the equipment. Do not expose the electric tools to
the rain. Do not use them in a humid or wet environment or in the presence of inflammable gases or liquids.
Always work in a well-lit place.
Protect yourself against electric shocks. Avoid being in touch with areas related to the ground.
When not in use, tools should be stored in a dry, secure place.
Dress properly with clothes adapted for the job. Use the safety glasses. You can also use a face or dust
mask if the cutting operation is dusty.
Never force a power tool, it will do the job better and safer at the rate for which it was intended.
Do not abuse the cable. Never carry the machine by the cable or yank it to disconnect. Keep the cable
away from heat, oil and sharp objects.
Maintain tools with care. Keep the machine clean for a better and safer performance. Follow instructions for
lubricating and changing accessories.
Unplug the machine when not in use, before maintaining, and when changing accessories.
Avoid unintentional starting. Do not carry plugged-in tool with finger on switch. Be sure the switch is off
when plugging in.
To put the machine in safety position, unplug the DC25, to avoid unintentional starting.
Stay alert. Watch what you are doing. Use common sense. Do not operate tool when you are tired.
Check if your machine is damaged. Before using the machine ALWAYS check that no parts have been
damaged in order to be sure that it can perform its intended function. Check for alignment of moving parts,
binding of moving parts, breakage of parts, mounting, and any other conditions that may affect its
operation. Damaged parts should be properly repaired or replaced by an authorised after-service centre.
DO NOT USE MACHINE IF DAMAGED.
Use AXXAIR accessories only.
Repairing by experts only. The machine is in accordance with the relevant safety rules.
Remove keys and spanners
