GT-526S Manual Rev F
Page 9
█
58
0.3
µ
29,780 CF
0.5
µ
1,400 CF
1.0
µ
610 CF
Figure 6
– Operate Screen Sampling
4.2.2. Sample Status
The top line of the Operate Screen displays the status of the GT-526S while the unit is
sampling. The following table shows the various status messages:
Status
Description
STARTING…
GT-526S is starting the sample and is waiting for the count
system to initialize.
HOLDING…
GT-526S is taking multiple samples and is waiting for the hold
time to finish.
STOPPING…
GT-526S is stopping the sample and is waiting for the count
system to stop.
█ █ █ █ █ █ 10
GT-526S is sampling. The progress bar moves from left to right
as the sample progresses. The time remaining is displayed to the
far right.
4.2.3. Sample History
Sample history (previous data) can be viewed on the Operate Screen when the unit is
stopped (not sampling). To view sample history, press the Enter key from the Operate
Screen. The unit will display the last sample event (newest record) and display
“
” in
the upper right corner of the display (see Figure 7) to indicate history data.
Press ◄ or
► to move through sample history one record at a time (◄ displays older events, ►
displays newer events). Press the Enter key at any time to return to the Operate
Screen. Press Start at any time to start a new sample.
18 AUG’06 11:23
0.3µ 0 CF
0.5µ 0 CF
1.0µ 0 CF
Figure 7
– History Screen
4.2.4. Warning / Error Messages
The GT-526S displays warning/error messages on the top line of the Operate Screen.
These messages alternate with the normal date/time header. The following table lists
the warning/error messages:
