AEROCET 532 Manual Rev B
Page 21
The subsequent screens describe each process step. An initial warning explains that
this is only intended to be used with the Docking Station to recover a lost IP Address.
Select CONTINUE. Remove the unit from the Docking Station. Then remove the
power plug from the back of the Docking Station (it will receive power from the unit
during this procedure). Make sure the network switch on the Docking Station is set to
WiFi and not Ethernet. Select NEXT and then place the unit in the dock. A green bar
will show the progress of the scan.
Figure 20 - WiFi Discovery Screens
Once the scan completes the WiFi connection credentials will display on the screen. If
the procedure was not performed correctly (e.g. dock plugged in/unit not docked/
network switch set to Ethernet) a time out message will appear. The Docking Station
can be plugged back in once the scan completes. Press escape to exit this screen.
WiFi Configuration
Timed Out!
WiFi Configuration
Uses:
Conn:
Host:
IP:
Mask:
GW:
DHCP
Your_WiFi
Esp-link
192.168.0.28
255.0.0.0
10.0.0.1
Figure 21 - WiFi Configuration Results (left) and Time Out Screen (right)
