AEROCET 531S Manual Rev H
Page 8
2.2.
Layout
The following figure shows the layout of the AEROCET 531S and provides a description
of each of the components.
Figure 3
– AEROCET 531S Layout
Component
Description
Power Switch
Switch that turns the AEROCET 531S on or off. Slide up (towards inlet
nozzle) to turn on and slide down to turn off.
Charging Jack
Input jack for the battery charger. This connection charges the internal
battery pack and provides continuous operating power for the unit.
USB Port
For USB serial communication
Serial Port
For serial communication (RS-232 or RS-485).
AT/RH Connector
Mating connector for the optional external ambient temperature (AT) and
relative humidity (RH) sensor. (PN G3120)
Inlet Nozzle
Ambient air inlet nozzle. Connect isokinetic probe to reduce turbulence
in the air sample.
Charging Jack
Inlet Nozzle
AT/RH Connector
USB Port
Serial Port
Power Switch
