Page 8
AEROCET-380 Operation Manual Rev A
2
AEROCET-380 SETUP and STARTUP
The following sections cover unpacking, layout and performing a test run to verify operation.
2.1 Unpacking
When unpacking a new AEROCET-380, verify that the contents are undamaged. Any
damages incurred to the equipment during shipping are the responsibility of the carrier. If
any damage to the shipment is noticed before unpacking,
a claim must be filed with the
commercial carrier immediately
. You should follow any special unpacking instructions
provided by the carrier as you then carefully remove all items from the containers and
inspect each component. It is recommended to document and photograph all damaged
packages and items before, during, and after unpacking them. Contact Met One Instruments
(see section 1.2 of this manual) to arrange for any replacement items needed.
See section 12 Accessories for more details.
ATTENTION:
A Silicon Labs CP210x Driver for the USB connection must be installed before connecting to
the USB Type C port.
Driver download weblink:
https://metone.com/usb-drivers/
